Hyundai HL960HD Wheel Loader
Net Power | 222 hp (166 kW) at 2,200 rpm |
Operating Weight | 19,930 kg (43,940 lbs) |
Standard Bucket | 3.3 m3 (4.3 yd3) |
Performance
- Hydraulic Locking Front axle w/ conventional rear axle
- Hi-Mate Remote Management System
- Eco Gauge
- Improved Bucket Fill Factor
Convenience
- Cab Comfort
- Audio System
- Heated Air-Ride Seat
- Wide Touchscreen Monitor
Serviceability
- Fully Sealed Engine Room with Tilt-Back Hood
- Centralized and Easy Access to Service Points
- Engine Air Filter with Increased Service Life
- Initial Maintenance Interval
The Hyundai HL960HD
The Hyundai HL960HD sits about in the middle of Hyundai’s wheel loader lineup, providing you with a great option for excellent power without going overboard. Of course, if you need something even more powerful, then we can help you with that too––Hyundai’s lineup includes a great option for pretty much every business need. In general, however, this wheel loader is ideal for making sure you have enough power to tackle a wide range of jobs, without falling short or paying for more than you really need.
A powerful engine in the Hyundai HL960HD provides up to 222 hp and up to 770 lb-ft of torque for great performance. It has a maximum operating weight of up to 43,940 lbs or up to 19,930 kg and a full-turn tipping load of up to 29,705 lbs or 13,475 kg. The standard bucket on the HL960HD gives you 4.3 cu.yd. of capacity or up to 3.3 cu.m. so you have plenty of space for scooping up gravel or clearing debris.
When traveling forward, the Hyundai HL960HD has a maximum speed of up to 24.9 mph and a top speed of up to 18.3 mph when in reverse. The bucket breakout force on this model is 36,751 lbs or 16,670 kg, and it has a dump clearance of well over 9 feet. All told, this is a fantastic wheel loader that is ideal for handling a lot of different tasks.
If you are unsure of exactly what you need, then come visit us at Quality Fleet Service to use our test pit and see what would work best for you. Our large test pit allows you to try out different pieces of machinery in a real-world setting to see how they compare and get a feel for each one. This lets you buy with confidence, knowing that you have chosen the right equipment for your business, and is just one more way we make sure your needs are met.
Hyundai’s Exceptional Warranty
Here at Quality Fleet Service, we are concerned with not only ensuring you get the right equipment for your work but also providing you with ongoing support to keep your machinery up and running. That is why we are so pleased with the warranty offered on the Hyundai HL960HD and the other wheel loaders in Hyundai’s lineup. This is some of the best warranty coverage in the industry, and it ensures we can keep our customers working hard for years to come.
The Hyundai HL960HD is covered by:
- 3-year or 3,000-hour full machine warranty
- 5-year or 10,000-hour structural warranty
- Limited lifetime articulation joint warranty
If you want extra coverage, then Hyundai offers an extended warranty of up to 5 years or 10,000 hours of full machine protection. Best of all, you do not have to decide on the extended warranty when you buy your equipment––you can opt for the extended warranty at any time while the standard warranty is still in effect.
Here at Quality Fleet Service, we use Hyundai factory parts whenever possible while performing maintenance or making repairs on your equipment. All Hyundai parts are covered by a 1 year or 1,500-hour factory warranty, which means you can rest assured that your machinery is in great condition. As a licensed Hyundai dealer and service center, our technicians are well-trained in caring for your equipment and ensure your warranties remain intact for as long as possible.
Engine
- Make/modelCUMMINS / QSB6.7
- TypeWater-cooled, 4-cycle, turbo-charged air-cooled, direct injection,
electronically controlled diesel engine - Gross power225 HP (168 kW) / 2,200 rpm
- Net power222 HP (166 kW) / 2,200 rpm
- Maximum torque106 kg·m (770 lb·ft) / 1,500 rpm
- No. of cylinders6
- Bore x stroke107 mm (4.21") x 124 mm (4.88")
- Displacement6.7L (408 in3 )
- Compression ratio17.3 : 1
- Air cleanerDry, 2-stage dual elements
- Alternator24 V – 95 Amp
- Battery2 x 12 V – 160 Ah, 900 CCA
- Starting motor24 V - 7.8 kW
Hydraulic System
- TypeLoad-sensing hydraulic system
- PumpVariable-displacement piston pump,
246L /min (65 gpm) - Control valve2-spool (bucket, boom)
3-spool (bucket, boom, aux) - System pressure280 kgf/cm2 (3,983 psi)
- Lift circuitValve has four functions: raise, hold, lower and float
Can adjust automatic kick-out from horizontal to full lift - Tilt circuitValve has three functions: tilt back, hold and dump
Can adjust automatic bucket positioner to desired load angle - CylinderType: Double acting
No. of cylinders–bore x stroke:
Tilt: 1-160 mm (6.3") x 530 mm (20.9") - Cycle timesRaise: 5.9 sec
Dump: 1.3 sec
Lower: 3.1 sec
Total: 10.3 sec
Transmission
- Torque converter type3-element, single-stage, single-phase
- Travel speed, km/h (mph)
Forward: 4 Speed1st 6.3 (3.9) | 2nd 11.9 (7.4) | 3rd 24 (14.9) | 4th 38.9 (24.2) - Travel speed, km/h (mph)
Forward: 5 Speed w/ lockup clutch1st 6.6 (4.1) | 2nd 11.6 (7.2) | 3rd 17.9 (11.1) | 4th 27.9 (17.3) | 5th 40.0 (24.9) - Travel speed, km/h (mph)
Reverse: 4 Speed1st 6.6 (4.1) | 2nd 12.6 (7.8) | 3rd 25.3 (15.7) - Travel speed, km/h (mph)
Reverse: 5 Speed w/ lockup clutch1st 7.1 (4.4) | 2nd 12.3 (7.6) | 3rd 29.4 (18.3)
Axles
- Drive systemFour-wheel drive system
- MountRigid front axle and oscillating rear axle
- Rear axle oscillation±12° center pin-loaded
- Hub reductionPlanetary reduction at wheel end
- DifferentialHyd Lock (front) / Conventional (rear)
- Reduction ratio24.666
Brakes
- Service brakesHydraulically actuated, wet-disc brakes actuate all 4 wheels • Independent axle-by-axle system • Self-adjusting and wheel speed brake
- Parking brakeSpring-applied, hydraulically released brake
- Emergency brakeWhen brake oil pressure drops, indicator light alerts operator, and parking brake automatically applies
Tires
- TypeTubeless, loader design tires
- Standard23.5 R25, L3
- Options include23.5-25, 20 PR, L3 | 23.5-25, 20 PR, L5
23.5, R25 XHA2, L3 | 20.5-25, 16PR, L3
Steering System
- TypeLoad-sensing hydrostatic articulated steering
- PumpVariable-displacement piston pump, 120L /min (32 gpm)
- Relief valve setting250 kgf/cm2 (3,556 psi)
- CylinderDouble acting
2-75 mm (2.9") x 424 mm (16.7") - Steering angle40° both right and left angle, respectively
- Additional featuresCenter-point frame articulation
Tilt and telescopic steering column
Service Refill Capacities
- Fuel tank300L (79.3 gal)
- DEF tank27L (7.1 gal)
- Cooling system42L (11.1 gal)
- Crankcase18L (4.8 gal)
- Transmission33L (8.7 gal)
- Front axle42L (11.1 gal)
- Rear axle40L (10.6 gal)
- Hydraulic tank110L (29.1 gal)
- Hydraulic system (including tank)200L (52.8 gal)
Dimensions
- A. Dumping clearance at max. height and 45° dump angle2,935mm (9' 7.5")
- B. ReachFull lift: 1,285mm (4' 2.5") | 2,134mm height (7 feet): 1,815mm (5' 11.5")
- C. Digging depth90mm (3.5")
- D. Overall length
(On ground | At carry)8,140mm (26' 8.5") | 8,060mm (26' 5") - E. Overall height (fully raised)5,640mm (18' 6")
- F. Bucket pivot height (max)4,105mm (13' 5.6")
- G. Front overhang2,810mm (9' 2.6")
- H. Wheelbase3,300mm (10' 9.9")
- I. Ground clearance410mm (1' 4.1")
- J. Height over exhaust3,360mm (11' 0.3")
- K. Height over cab3,450mm (11' 3.8")
- L. Rollback angle
(On ground | At carry)42° | 47° - M. Dump angle50°
- - Clearance circle, over bucket (carry position)13,415mm (44')
- - Clearance circle, outside of tires12,050mm (39' 6")
- - Clearance circle, inside of tires6,510mm (21' 4.3")
- N. Overall width
(with bucket | without bucket)2,900mm (9' 6.2") | 2,770mm (9' 1.1")
Put Quality Fleet Service to Work for You
Whether you are in the market for a new wheel loader or need service for your current equipment, we are here to help. Our salespeople are not interested in pushing something you do not want on you; instead, they are here to listen to your needs and make sure you get exactly the right machinery for your business. We specialize in working with businesses because we love to see others in the area succeed and thrive in a wide range of industries.
Here at Quality Fleet Service, our repair and service shop is fully equipped to handle pretty much anything. We have hydraulic and aerial lift equipment and the tools to perform proper diagnostics and take care of your machinery––whether you need repairs or routine maintenance, we are here to help. And with our welding and fabrication equipment, we are ready to deal with a wide range of unexpected issues that might arise.
We also provide on-road and on-site service for our customers, coming to you to make repairs and perform maintenance when you cannot bring your machinery to us. 24-hour emergency service is even available in all kinds of weather, so we can make sure you keep working no matter what else is going on. All of this is to ensure you are able to get the job done because your success is our success. Call or come visit us at Quality Fleet Service today to get the right equipment for your business’s needs.