phone 413-213-0632  |  access_time 7:00 AM - 5:00 PM Monday - Friday

Hyundai HL940XT Wheel Loader

Net Power 156 hp (116 kW) at 2,100 rpm
Operating Weight 13,490 kg (29,740 lbs)
Standard Bucket 2.3 m3 (3.0 yd3)
Hyundai HL940XT Inside Cab


  • Eco Pedal
  • Hi-Mate Remote Management System
  • Eco Gauge
  • Improved Bucket Fill Factor


  • Cab Comfort
  • Audio System
  • Heated Air-Ride Seat
  • Wide Touchscreen Monitor


  • Fully Sealed Engine Room with Tilt-Back Hood
  • Centralized and Easy Access to Service Points
  • Engine Air Filter with Increased Service Life
  • Initial Maintenance Interval
A powerful and reliable wheel loader can be the very cornerstone of a business, keeping you up and running and getting the job done on time. The Hyundai HL940XT is the extended reach version of their standard HL940 model and is designed to handle a great deal of work. With an extended reach that gives you access to higher dump heights and a large standard bucket, the HL940XT is the perfect option for clearing debris at a job site, handling massive amounts of snow, and loading up aggregate materials into a truck.

Here at Quality Fleet Service in South Hadley, MA, we specialize in helping other businesses achieve their goals and succeed through the performance of their commercial equipment. We are proud to offer a large number of great Hyundai machines, including the HL940XT and other wheel loaders, so we can help you get exactly the right equipment for your needs. Our expert technicians will be here for you for years to come, providing maintenance service and repairs as needed, even coming to you on-site to get you back up and running right away. Visit us at Quality Fleet Service today to see what we can do for you.

The Hyundai HL940XT

Among the lineup of fantastic wheel loaders that we offer, the Hyundai HL940XT is actually the starting model, with the lowest operating rate and net power among available models. That does not mean it is less than a fantastic option for a wide range of uses; however, only that it is ideal for businesses with lower requirements. If you need something much more powerful, then Hyundai has you covered with a number of options to consider.

The net power of the HL940XT is up to 156 hp with a maximum torque of up to 622 lb-ft. It has an operating weight of up to 29,740 lbs or 13,490 kg, so keep that in mind as you are trying to decide on which Hyundai wheel loader is right for you. The standard bucket that it comes with has a capacity of up to 3.0 cu.yd. or up to 2.3 cu.m. and it has a breakout force of 24,470 lbs or 11,100 kg.

Going forward, the Hyundai HL940XT has a maximum speed of up to 24.9 mph and a top speed of up to 16.2 mph in reverse. It has a standard Z-bar design and a dump clearance of up to 10.5 feet, which is more than a foot greater than the regular HL940 model, due to its extended reach design. This can be very important if you know you will be loading materials into a large bin with high sides, so be sure to keep this in mind when choosing your wheel loader.

Here at Quality Fleet Service, we are ready to help you figure out exactly which wheel loader is right for you. Our test pit lets you try out your equipment before you buy it, so you know you have found the perfect choice for your business. Whether you are just getting started or looking to expand, we are here to help.

The Hyundai Warranty

One of the reasons we are so proud to offer Hyundai machinery is because they have one of the best warranties in the industry. Considering how crucial equipment like the Hyundai HL940XT is to a business like yours, you want to make sure that your investment in such machinery is protected and covered by a great warranty. The standard Hyundai warranty on this model includes:

  • 3-year or 3,000-hour full machine warranty
  • 5-year or 10,000-hour structural warranty
  • Limited lifetime warranty on articulation joints

In addition to this, Hyundai offers extended warranties on their products, including the HL940XT, which can give you up to 5 years or 10,000 hours of protection on the full machine. While a lot of other manufacturers offer extended warranties on their products, you usually have to buy it upfront when you purchase the machine. With the Hyundai extended warranty, however, you can buy it at any time while the HL940XT is still under its standard warranty.

We use Hyundai factory parts whenever possible for our repairs here at Quality Fleet Service. These are covered by Hyundai’s parts warranty for 1 year or 1,500 hours in addition to any other warranty coverage you have. This ensures your equipment keeps working for as long as you do.


  1. Make/model
    CUMMINS / QSB6.7
  2. Type
    Water-cooled, 4-cycle, turbocharged air-cooled, direct-injection, electronically controlled diesel engine
  3. Gross power
    158 HP (118 kW) / 2,100 rpm
  4. Net power
    156 HP (116 kW) / 2,100 rpm
  5. Maximum torque
    86 kg·m (622 lb·ft) / 1,500 rpm
  6. No. of cylinders
  7. Bore x Stroke
    107 mm (4.21”) x 124 mm (4.88”)
  8. Displacement
    6.7 (409 in3)
  9. Compression ratio
    17.3 : 1
  10. Air cleaner
    Dry, 2-stage dual elements
  11. Alternator
    24 V - 95 Amp
  12. Battery
    2 x 12 V - 120 Ah, 850 CCA
  13. Starting motor
    24 V - 7.8 kW

Hydraulic System

  1. Type
    Load-sensing hydraulic system
  2. Pump
    Variable-displacement piston pump
    149 L/min (39.4 gpm)
  3. Control valve
    2 spool (bucket, boom)
    3 spool (bucket, boom, aux)
    (opt.) Pilot pressure controlled type
  4. System pressure
    280 kgf/cm2 (3,982 psi)
  5. Lift circuit
    The valve has four functions: raise, hold, lower and float.
    Can adjust automatic kick-out from horizontal to full lift
  6. Tilt circuit
    The valve has three functions: tilt back, hold and dump
    Can adjust automatic bucket positioner to desired load angle
  7. Cylinder HL940/HL940XT
    Type: Double acting
    No. of cylinders-bore x stroke
    Lift: Lift 2-110 mm x 738 mm (4.3""x 29.1"")
    Tilt: Tilt 1-125 mm x 505 mm (4.9""x 19.9"")
  8. Cycle times HL940 / HL940XT
    Raise: 5.5 sec
    Dump: 1.1 sec
    Lower: 3.0 sec
    Total: 9.6 sec


  1. Torque converter type
    3-element, single-stage, single-phase
  2. Travel speed, FWD 1st
    6.9 (4.3)
  3. Travel speed, FWD 2nd
    12.7 (7.9)
  4. Travel speed, FWD 3rd
    24.9 (15.5)
  5. Travel speed, FWD 4th
    40 (24.9)
  6. Travel speed, REV 1st
    7.3 (4.5)
  7. Travel speed, REV 2nd
    13.4 (8.3)
  8. Travel speed, REV 3rd
    26.1 (16.2)


  1. Drive system
    Four-wheel drive system
  2. Mount
    Rigid front axle and oscillating rear axle
  3. Rear axle oscillation
    ±12° (total 24°)
  4. Hub reduction
    Planetary reduction at wheel end
  5. Differential
    Hydraulic lock (front) / conventional (rear)
  6. Reduction ratio

Transmission: Fully automatic power shift, countershaft type with soft-shift in range and direction. Properly matched torque converter to engine and transmission for excellent working ability.


  1. Service brakes
    Hydraulically actuated, wet-disc brakes actuate all 4 wheels
    Independent axle-by-axle system
    Self-adjusting and wheel speed brake
  2. Parking brake
    Spring-applied, hydraulically released brake
  3. Emergency brake
    When brake oil pressure drops, indicator light alerts operator, and parking brake automatically applies


  1. Type
    Tubeless, loader design tires
  2. Standard
    20.5 R25, L3
  3. Options include
    20.5-25, 16PR, L3 | 17.5-25, 12PR, L3
    20.5-25, 16PR, L2 | 17.5-25, 12PR, L2
    20.5 R25, XHA2, L3 | 17.5 R25, XHA1, L3

Steering System

  1. Type
    Load-sensing hydrostatic articulated steering
  2. Pump
    Variable-displacement piston pump
    149L/min (39 gpm)
  3. Relief valve setting
    210 kgf/cm2 (2,987 psi)
  4. Cylinder
    Double acting
    65 mm (2.56") x 429 mm (16.9")
  5. Steering angle
    40° both right and left angle, respectively
  6. Additional Features
    Center-point frame articulation Tilt and telescopic steering column

Service Refill Capacities

  1. Fuel tank
    220L (58 gal)
  2. DEF tank
    19L (5.0 gal)
  3. Cooling system
    34L (9.0 gal)
  4. Crankcase
    18L (4.8 gal)
  5. Transmission
    27L (7.1 gal)
  6. Front axle
    24L (6.3 gal)
  7. Rear axle
    24L (6.4 gal)
  8. Hydraulic tank
    90L (23.8 gal)
  9. Hydraulic system (including tank)
    130L (34.0 gal)
Hyundai HL940XT Wheel Loader Dimensions

All dimensions are approximate.

Bucket type: General purpose bolt-on cutting edge


  1. A. Dumping clearance at max. height and 45° dump angle.
    3390mm (11' 1.5")
  2. B. Reach
    Full Lift: 1010mm (3' 3.8")
    2,134mm height (7 ft) | 2,045mm (6' 8.5")
  3. C. Digging depth
    130mm (5.1")
  4. D. Overall length (On ground | At carry)
    8,080mm (26' 6.1") | 8,030mm (26' 4.1")
  5. E. Overall height (fully raised)
    5,860mm (19' 2.7")
  6. F. Bucket pivot max. height
    4,425mm (14' 6.2")
  7. G. Front overhang
    3,075mm (10' 1.1")
  8. H. Wheelbase
    2,950mm (9' 8")
  9. I. Ground clearance
    417mm (1' 4.4")


  1. J. Height over exhaust
    3,245mm (10' 7.8")
  2. K. Height over cab
    3,300mm (10' 9.9")
  3. L. Rollback angle (deg) (On ground | At carry)
    42 | 50
  4. M. Dump angle (deg)
  5. - Clearance circle, over bucket (carry position)
    12,130mm (41' 2.1")
  6. - Clearance circle, outside of tires
    10,674mm (35')
  7. - Clearance circle, inside of tires
    5,814mm (19' 1")
  8. N. Overall width with bucket
    2,600mm (8' 6.3")

QFS Will Be Here for You

Here at Quality Fleet Service, we offer total support for our commercial customers because we only focus on working with other businesses to keep you up and running. That means we are not only a licensed Hyundai retailer, but we are also certified to offer long-term support and service on the Hyundai HL940XT or any other machinery that we offer. You can bring your wheel loader back to us for maintenance and service as needed, confident in the knowledge that you trust your vital equipment with skilled technicians that specialize in working on your machinery.

We also offer on-road and on-site support when you cannot come to us. Whether you are out at a job site, deep in a forest, or just about anywhere else in the area, we will come to you and provide whatever service and repairs we can to get you back to work. And since we know that breakdowns and problems do not only occur during business hours, we offer emergency 24-hour service and support for our customers. If your machinery has a problem in the middle of the night, on the weekend, or during a serious winter storm, we will come to you to help you get the job done.

When you can come to us, our large, full-service facility has everything we need to perform regular service and repairs. We use Hyundai factory parts to keep your machinery in great shape and ensure your warranty remains intact. Visit us at Quality Fleet Service today and see how we can help your business succeed.