phone 413-213-0632  |  access_time 7:00 AM - 5:00 PM Monday - Friday

Hyundai HL940TM Wheel Loader


Net Power 156 hp (116 kW) at 2,100 rpm
Operating Weight 13,600 kg (29,980 lbs)
Standard Bucket 2.3 m3 (3.0 yd3)
Hyundai HL940TM Wheel Loader Cabin

Performance

  • Eco Pedal
  • Hi-Mate Remote Management System
  • Eco Gauge
  • Improved Bucket Fill Factor

Convenience

  • Cab Comfort
  • Audio System
  • Heated Air-Ride Seat
  • Wide Touchscreen Monitor

Serviceability

  • Fully Sealed Engine Room with Tilt-Back Hood
  • Centralized and Easy Access to Service Points
  • Engine Air Filter with Increased Service Life
  • Initial Maintenance Interval
Standard, Z-bar wheel loaders are great for a wide range of tasks. Still, other times a parallel design is a better option due to the increased lifting capacity, stability, and enhanced visibility they can provide. The Hyundai HL940TM is one of two parallel-bar wheel loaders offered by Hyundai as part of their “Tool Master” line. This is a great wheel loader for clearing snow, moving debris, and loading up aggregate materials at a job site, but it also works well with a fork for moving heavy pallets around. If you are unsure of which wheel loader might be best for your business’s needs, then visit us at Quality Fleet Service.Here at Quality Fleet Service, we are not only a certified Hyundai dealer, but we also have trained technicians on hand to provide you with long-term service and support. Whether you know exactly which wheel loader is right for you, or you still have a lot of questions, we are here to help and work with you to make sure you get the perfect equipment for your business. We also provide maintenance and repairs for your machinery for years to come, with factory warranty service and original Hyundai parts for your equipment. Visit us at Quality Fleet Service today to get the machinery your business needs to succeed.

The Hyundai HL940TM

Most of the wheel loaders offered by Hyundai are Z-bar designs, which provide great power and reliability. Their Tool Master series, however, which includes the Hyundai HL940TM, uses a parallel design rather than the Z-bar. A parallel wheel loader gives the operator better visibility while using the loader, and also provides increased lifting capacity and stability. This added stability makes the HL940TM a great choice if you know you will need to fit a fork attachment onto the boom, as it makes it easier to keep loads level.

The Hyundai HL940TM has a powerful engine that provides up to 156 hp and up to 622 lb-ft of torque for great overall performance. This particular model has an operating weight of up to 29,980 lbs or 13,600 kg, and a full-turn tipping load of up to 16,310 lbs or 7,400 kg. The standard bucket that it comes with has a capacity of up to 3.0 cu.yd. or 2.3 cu.m. and this wheel loader has a bucket breakout force of up to 23,880 lbs or 10,830 kg.

You can go up to 24.9 mph in the Hyundai HL940TM when traveling forward, and it has a top speed of up to 16.2 mph when in reverse. Although this model does not have an extended boom, which is available on some Z-bar models, due to its parallel design, it still has a dump clearance of more than 9 feet, which makes it great for using with large dumpsters and trucks. This is an excellent model, but if you need more power with a parallel wheel loader, then you should consider the Hyundai HL955TM.

If you are uncertain of exactly what you need to get the job done, then visit us at Quality Fleet Service and try out our test pit. You can use a wide range of equipment here at our massive test pit and see how they hold up and compare in real-world conditions. This gives you a good idea of how they each function and ensures you get the right machine for what you need.

Amazing Hyundai Warranty Coverage

Choosing the right equipment is important, as is getting machinery that will keep working for as long as possible. All Hyundai wheel loaders, including the HL940TM, are covered by some of the best warranties in the industry. This includes:

  • 3-year or 3,000-hour full machine warranty
  • 5-year or 10,000-hour structural warranty
  • Limited lifetime warranty on articulation joints

In addition to the standard warranty coverage provided on Hyundai wheel loaders, you can also choose extended coverage, which provides up to 5 years or 10,000 hours of full machine protection. The great thing about this extended warranty is that you do not have to decide on it at the time of purchase––you can get the extended warranty at any time while your machine is still under its standard warranty.

Here at Quality Fleet Service, we use Hyundai factory parts whenever we work on the HL940TM or other machinery from Hyundai. All of these parts are under a standard 1 year or 1,500-hour warranty that ensures they will keep working hard for you. Plus, since we are a factory authorized retailer and service center, you know that the work we do is covered and will ensure your warranty remains intact for as long as possible.

Engine

  1. Make/model
    CUMMINS / QSB6.7
  2. Type
    Water-cooled, 4-cycle, turbocharged air-cooled, direct-injection, electronically controlled diesel engine
  3. Gross power
    158 HP (118 kW) / 2,100 rpm
  4. Net power
    156 HP (116 kW) / 2,100 rpm
  5. Maximum torque
    86 kg·m (622 lb·ft) / 1,400 rpm
  6. No. of cylinders
    6
  7. Bore x Stroke
    107 mm (4.21”) x 124 mm (4.88”)
  8. Displacement
    6.7L (409 in3)
  9. Compression ratio
    17.3 : 1
  10. Air cleaner
    Dry, 2-stage dual elements
  11. Alternator
    24 V - 95 Amp
  12. Battery
    2 x 12 V - 120 Ah, 850 CCA
  13. Starting motor
    24 V - 7.8 kW

Hydraulic System

  1. Type
    Load-sensing hydraulic system
  2. Pump
    Variable-displacement piston pump 149L /min (39.4 gpm)
  3. Control valve
    2 spool (bucket, boom)
    3 spool (bucket, boom, aux)
    (opt.) Pilot pressure controlled type
  4. System pressure
    280 kgf/cm2 (3,982 psi)
  5. Lift circuit
    The valve has four functions: raise, hold, lower and float.
    Can adjust automatic kick-out from horizontal to full lift
  6. Tilt circuit
    The valve has three functions: tilt back, hold and dump
    Can adjust automatic bucket positioner to desired load angle
  7. Cylinder
    Type: Double acting
    No. of cylinders-bore x stroke
    Lift: 2-110 mm x 738 mm (4.3"x 29.1")
    Tilt: 2- 95 mm x 745 mm (3.6"x 29.3")
  8. Cycle times
    Raise: 5.5 sec
    Dump: 1.6 sec
    Lower: 3.0 sec
    Total: 10.1 sec

Transmission

  1. Torque converter type
    3-element, single-stage, single-phase
  2. Forward Travel speed, km/h (mph)
    1st 6.9 (4.3)
    2nd 12.7 (7.9)
    3rd 24.9 (15.5)
    4th 40 (24.9)
  3. Reverse Travel speed, km/h (mph)
    1st 7.3 (4.5)
    2nd 13.4 (8.3)
    3rd 26.1 (16.2)

Axles

  1. Drive system
    Four-wheel drive system
  2. Mount
    Rigid front axle and oscillating rear axle
  3. Rear axle oscillation
    ±12° (total 24°)
  4. Hub reduction
    Planetary reduction at wheel end
  5. Differentia
    Hydraulic lock (front) / conventional (rear)
  6. Reduction ratio
    21.53

Transmission: Fully automatic power shift, countershaft type with soft-shift in range and direction. Properly matched torque converter to engine and transmission for excellent working ability.

Brakes

  1. Service brakes
    Hydraulically actuated, wet-disc brakes actuate all 4 wheels Independent axle-by-axle system Self-adjusting and wheel speed brake
  2. Parking brake
    Spring-applied, hydraulically released brake
  3. Emergency brake
    When brake oil pressure drops, indicator light alerts operator,

Tires

  1. Type
    Tubeless, loader design tires
  2. Standard
    20.5 R25, L3
  3. Options include
    20.5-25, 16PR, L3 | 20.5-25, 16PR, L2
    20.5 R25, XHA2, L3 | 17.5-25, 12PR, L3
    17.5-25, 12PR, L2 | 17.5 R25, XHA1, L3

Steering System

  1. Type
    Load-sensing hydrostatic articulated steering
  2. Pump
    Variable-displacement piston pump
    149L/min (39 gpm)
  3. Relief valve setting
    210 kgf/cm2 (2,987 psi)
  4. Cylinder
    Double acting
    65 mm (2.56") x 429 mm (16.9")
  5. Steering angle
    40° both right and left angle, respectively
  6. Additional Features
    Center-point frame articulation
    Tilt and telescopic steering column

Service Refill Capacities

  1. Fuel tank
    220L (58 gal)
  2. DEF tank
    19L (5.0 gal)
  3. Cooling system
    34L (9.0 gal)
  4. Crankcase
    18L (4.8 gal)
  5. Transmission
    25L (6.6 gal)
  6. Front axle
    24L (6.3 gal)
  7. Rear axle
    24L (6.3 gal)
  8. Hydraulic tank
    90L (23.8 gal)
  9. Hydraulic system (including tank)
    130L (34.3 gal)
Hyundai HL940TM-Wheel Loader Dimensions

Dimensions

  1. A. Dumping clearance at max. height and 45° dump angle
    2,840mm (9' 3")
  2. B. Reach
    Full lift: 1,330mm (4' 4") | 2,134 mm height (7 feet): 1,805mm (5.11")
  3. C. Digging depth
    100mm (3.9")
  4. D. Overall length (On ground)
    7,715mm (25' 3")
  5. E. Overall height (fully raised)
    5,260mm (17' 3")
  6. F. Bucket pivot max. height
    3,980mm (13')
  7. G. Wheelbase
    2,950mm (9' 8")
  8. H. Ground clearance
    417mm (1' 4.5")

 

  1. I. Height over cab
    3,300mm (10' 10")
  2. J. Rollback angle (At carry)
    54°
  3. K. Dump angle (deg)
    50°
  4. - Clearance circle, over bucket (carry position)
    11,676mm (38' 3.7")
  5. - Clearance circle, outside of tires
    10,671mm (35')
  6. - Clearance circle, inside of tires
    5,814mm (19' 8")
  7. L. Overall width with bucket
    2,550mm (8' 4.4")

Your Success is Our Priority

Although we are proud to offer Hyundai construction equipment, we are also here to help you with any maintenance and repairs you need, whether you bought your machinery from us or not. You can bring your equipment here to our 15,000 sq.ft. facility where we have everything we need to perform standard service and make repairs whenever necessary. We have everything from aerial lifts to fabrication equipment so we can take care of anything you need and get you back to work as quickly as possible.

Of course, we know that it is not always possible to come to us, which is why we also provide on-site and on-road service and repairs. We can come to you, whether you are deep in a forest or stuck by the side of the road, and do everything we can to get your equipment up and running again. We even provide emergency 24-hour service to our customers, because we know that issues and problems do not only arise during business hours Monday through Friday. When emergency workers need their equipment repaired in the middle of a snowstorm, we are the ones they call to get them back to work.

Call or come visit us at Quality Fleet Service in South Hadley, MA, to find the perfect equipment for your business and to see what we can do for you.